JAKE'S POWER WASHING
DISPATCH: HOLLAND, PA 18966 UNIT RATE: $0.10–$0.17 / SQ. FT.
Book Rig
INTAKE TERMINAL HOLLAND, PA 18966 DIRECT OWNER DISPATCH

Submit your exterior property details for an on-site inspection and firm square-foot estimate.

No blind phone quotes. Jake evaluates access, substrate condition, plant layout, and water source pressure before confirming project work orders across Holland, PA and surrounding Bucks County townships.

WORK ORDER SPECIFICATION FORM

Property Inspection & Quote Intake

Fill in your property specs below. If you previously tuned values in our per-unit price estimator, they will synchronize automatically with the specification line below. You may also provide rough measurements or simply request Jake to measure the elevations on site.

Please enter your full name or property contact name.
Please enter a valid telephone number.
Please provide a valid email address.
Please state the property street address.
Consent to communication and project inspection terms is required.
Dispatch Base & Postal Address

JAKE'S POWER WASHING
201 MONROE COURT
HOLLAND, PA 18966
United States

Bucks County Municipal Zone: Northampton Township

Note: Our shop operates mobile trailer rigs dispatched straight to residential and commercial properties. We do not maintain an over-the-counter retail showroom at this address.

Direct Owner Communications
Phone: (215) 907-1817
Email: [email protected]
Lead Time: Booking slots available upon request
Lead Specialist: Jake (Operating since 2026)
Service Perimeter & Coverage Area

Our primary dispatch zone radiates from Holland, PA (18966) across central and lower Bucks County:

  • Holland & Churchville
  • Richboro & Northampton Township
  • Newtown, Langhorne & Wrightstown
  • Southampton & Upper Southampton
  • Yardley, Washington Crossing & Warwick
What Happens After Submission

1. Preliminary Review: Jake reviews the satellite imagery and your square-footage figures within 24 hours.
2. On-Site Evaluation: If substrate conditions or ladder clearances need verification, Jake conducts an on-site perimeter check.
3. Written Schedule & Rate: You receive an all-in rate breakdown ($0.10–$0.17/sq. ft. for siding) and confirmed appointment slot.

Property Owner Question • Holland, PA
"Do I need to be home all day while you perform the exterior wash?"
Jake's Operational Policy

Exterior access, closed windows, and an active exterior water tap are all we require.

You do not need to take time off work or wait inside. As long as your perimeter gates are unlocked, all windows and sliding doors are firmly latched, outdoor electrical fixtures have closed weatherproof covers, and your exterior spigot produces at least 4.0 gallons per minute, our commercial rig operates entirely from your driveway and turf perimeter. Jake performs the pre-rinse shrubbery drenching, metered detergent dwell, wide-angle low-pressure rinse, and a final quality audit before locking your gates upon departure.

Jake testing flow rate and connecting certified intake adapter to residential spigot.
FIGURE CON-01: Commercial dual-check backflow preventer & high-flow rubber intake line on residential spigot HOLLAND, PA 18966 • BACKFLOW CERTIFIED
Homeowner Inquiry • Richboro, PA
"How do your square-foot prices work if I have both siding and a long driveway?"
Jake's Direct Reply

Each surface discipline carries its own transparent unit rate with zero surprise surcharges.

Residential siding soft-washing is calculated strictly at $0.10 to $0.17 per square foot of vertical wall surface, with environmental surfactant pre-treatment included. Horizontal flatwork—such as poured concrete driveways, flagstone walkways, and pool aprons—is priced between $0.12 and $0.18 per square foot, which includes hot-water high-pressure rotary surface cleaning. When you bundle multiple zones onto a single work order, our rig setup time is shared, keeping your final price at the lower end of our published rate brackets.